Gonna give this a stab once get my hands on the 'new' car.
Heard it can be £300 at least to have it done, so whats the best products out there, and whats the process if tackiling myself?
Gonna give this a stab once get my hands on the 'new' car.
Heard it can be £300 at least to have it done, so whats the best products out there, and whats the process if tackiling myself?
Gyeon is what I would recommend I've used a few but gyeon has lasted the best and is the easiest to apply.
Sent from my SM-N960F using Tapatalk
Gyeon mohs I've applied to about a dozen cars
Sent from my SM-N960F using Tapatalk
No no you need to fully prep the car. I citrus prewash, foam, wash, decontaminate, clay bar, then machine polish.
Then I use prep spray on the whole car, tape up all rubbers and plastics then apply ceramic. And allow to cure for 24hrs. Then apply the final coat and keep the car dry for 3 days.
It's not an afternoon job.
Sent from my SM-N960F using Tapatalk
This was the most recent car I've done. It was more awkward being 2 tone matte to gloss
Sent from my SM-N960F using Tapatalk
Ceramic coating is all about the prep work. Take your time but you’ll need to decontaminate, clay and machine polish.
I’ve used Auto Finesse Caramics and so far like it but I’ve not had it applied to the car for a short period so can’t give you an indication of longevity.
Racing Grey F56 JCW GP 0370 - Chilli Red Mirror Caps, Custom OHC Alcantara Steering Wheel, Motech Performance By PiperCross Panel Filter, Custom GP Steering Wheel Spoke, Custom GP Stitched Carbon Side Scuttles, JCW Pro Mats, RSI C6 Carbonfibre Scoop, JCW Pro Stitched Carbon Boot Handle
Ice Blue R55 Clubvan - JCW Shiftlight, JCW Carbon Fibe Handbrake, JCW Carbon Fibre Dash, JCW Steering Wheel, Recaro JCW Sportster CS, CoolerWorx ShortShifter, BC Racing Coilovers, JCW Brembo 4pots, HEL Braided Lines, JCW Front Bumper, MINI Challenge Splitter, White Rota Blitz
This is the 208 I coated in August last year. Still beads like day one.
Sent from my SM-N960F using Tapatalk